This wall was in a terrible condition so we decided to hack the whole back of the building off and rerender! We used a integral waterproofer with a three coat render system. And etched in block joints to match the existing render work on building.
This is a new custom made cattle grid!. This customer wanted to increase the size of his driveway entrance so we had to have a custom made cattle grid fabricated. We pulled hedge back one side and rebuilt the granite wall incorporating and new granite gate post that wasn’t there
This lead gulley is 10m long it was originally ran in what I think to be code 5 lead they had layed it in 2.5 metre sections! Which is bad practice for code 5 lead as it can’t expand and contact “hence” splitting! We refitted code 5 lead in no
This was a large barn conversion that we worked on! We had to replace all the timbers in the original barn roof which were 6×2 to 8×3 which were to building reg specs. these were uprated to such large timber due to the shear size of roof and pitch. And
Couple of repointing jobs here. This was a fairly big patio that we disced out and used a resin based compound to repoint in. It will out last any cement base motar by many years. Bottom right picture. This house had problems with water ingress in the garage. They had
Few before and after photos!. This house belongs to a old family friends they called apon us to spruce the place up. So we done a few crack repairs and put it back to the original colours and the white house sparkles once more. 🙂
